Table of Contents
Advertisement
"2: SET PING" (PING Options Setting Screen)
1.
S
elect "2: SET PING" at the TEST PING menu and then press the
E
NT key.
The current settings are displayed.
[1: DESTINATION IP]:
Specifies the IP address of the host computer to be pinged.
[2:DATA SIZ
E]:
S
pecifies
the data size of the echo request.
[3:INTERVAL]:
Specifies the echo request interval (in units of 100 ms).
[4:TIMEOUT]:
Specifies the timeout period (in units of 100 ms) fo
[5
:COUNT]:
Specifies the number of echo requests to be sent.
[6:SEND TYPE]:
Selects the ech
o re
(Refer to "PING Echo Request Transmission Timing (SEND TYPE)" on the fol
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]
se
t, and then
pr
es
s t
Th
e mode chan
ge
s
to
U
s
e the cursor keys ([ ] [►]) to highlight the "6: SEND TYPE" setting.
3.
Enter the setting values with the numerical keys and dot key.
To delete a single character, press the BS key.
Press the C key to delete all entries made.
4.
Enter the setting values and then press the ENT key.
Press the C key to return to the TEST PING menu.
Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item
DATA SIZE
INTERVAL
TIMEOUT
COUNT
* Specifying zero (0) will set the number of echo requests to "infinite," meaning that echo requests will be
sent continuously until the PING test is aborted.
If a value outside the allowable entry range listed above is specified, the nearest value within the range
will automatically be applied.
quest send timing (TYPE
he ENT key.
entry mode and the cursor displays.
◄
Allowable Entry range
4 to 1472
0 to 65535
0 to 65535
0
*
to 65535
Barcode Handy Terminal
r the echo request.
1 or TYPE 2).
[4] [5] [6]) to highlight the item to be
Default
56
10
10
4
lowing page for details.)
101
Advertisement
Chapters
Table of Contents
