Denso BHT-604B User Manual page 72

BHT-604B
The following setting data is copied when copying between BHT units.
- Note -
LCD contrast level
Beeper volume
Switching between beeper and vibrator
Program to be executed automatically when the BHT is turned ON
Message version (English or Taiwan)
Backlight brightness of the LCD display
Backlight brightness of the LCD display during power save mode
Key backlight
Display font size
System status display
Date
Time
Setting of black-and-white inverted label reading function (enable/disable)
Decode level
Minimum number of digits to be read for ITF
Minimum number of digits to be read for STF
Minimum number of digits to be read for Codabar (NW-7)
Interface port to be used in user programs
Interface port to be used in System Mode
Communication parameters for the infrared interface
Communication parameters for the direct-connect interface
Communication protocol options for the infrared interface
Communication protocol options for the direct-connect interface
Communication protocol type
Shift key function definition
M1 key function definition
M2 key function definition
M3 key function definition
M4 key function definition
M5 key function definition
M6 key function definition
Resume function
Remote wake-up setting (enable/disable)
Transmission speed for remote wake-up
Remote wake-up history
YMODEM option
IP address of FTP server
User name of FTP server
Password of FTP server
Default directory for FTP server
60