Table of Contents
Advertisement
BHT-604B
3.
At the slave BHT to be tested, select "1: SLAVE", and at
BHT, select "2: MASTER". Then press the ENT key.
The screen displays as shown on the right during the test, and an infrared
communication test is performed.
If
an error occurs, the tested slave BHT beeps three times and displays the
s
creen on the right.
T
he meanings of the error codes in parentheses are as follows.
( X X )
1: 9600 bps
2: 115200 bps
3:
460800 bps
P
res
s the C key to return to the TEST CO
T
he
master BHT automatically returns
m
en
u 10 seconds after the occurrence
U
pon normal completion of the test, the tested slave BHT beeps o
d
isplays the screen on the right.
P
ress the C key to return to the TEST COMMUNICATION menu.
The master BHT automatically returns to the TEST COMMUNICATION
menu.
96
1:
The received data is different from the sent data.
2:
A timeout has occurred during standby for data
reception.
MMUNICATION menu.
to the TEST CO
of
an error.
the master
MMUNICATION
nce and
Advertisement
Chapters
Table of Contents
