Menu) - Denso BHT-604B User Manual

BHT-604B
4.5.13 Downloading/Uploading the System Message File
(SYSTEM MESSAGE Menu)
The system message file is a file (file name: "_B60MSG.FN3") used by the system to display messages
such as "Shutdown in progress. Do not remove the battery." or "Charge the battery!".
D ownloading/Uploading the System Message File
(1) Upload the system me
(2 ) Download the uploaded system mess
 Uploading the System Message File
Create a system message file based on the curre
computer and so on. After uploading, delete the created system message file.
 Downloading the
Receive the system message file from the host computer and so on to which it was backed up, and after
setting the stored system messages, delete the received system message file.
The communication parameters, communicatio
c ommunication environment" in section "4.5.5 System Environment Settings" are used when uploading
a nd downloading.
- Supplement
Use the following procedure to download and upload the system message file.
1.
Press the 6 key while holding down the SF key at the SYSTEM MENU.
The SYSTEM MESSAGE menu displays as shown on the right.
[1: DOWNLOAD]:
Downloads the system message file.
[2: UPLOAD]:
Uploads the system message file.
Refer to the following section for details of the above items.
Press the C key to return to the SYSTEM MENU.
120
ssage file to the host computer and so on.
age file at another BHT.
system message file
System messages are normally set when the BHT is shipped from the factory, and
-
therefore operation at this menu is unnecessary.
nt system message settin
n protocol, and interface set at "[5] Setting the
gs and upload it to the host