Siemens PERFECT HARMONY GENIII/E Series User Manual page 91

Perfect Harmony GENIII/e User's Manual
Parameter ID
Change
5010
security level
Drive running
5020
inhibit
Table 3-49: Security Edit Menu Function Descriptions (5010, 5020)
ID
Change Security
Level
5010
Level = 0,5,7,8
Drive Running
Inhibit
5020
1 = enable
0 = disable
CAUTION! Do not change the Drive Running Inhibit (5020) setting of any parameter unless you are
COMPLETELY certain that the change is safe. Changes may result in massive environmental and
property destruction, injuries, and/or loss of life.
Upon selecting either of these functions, an "Enter Menu ID" prompt is displayed. If the menu number is known, it
may be entered at this point. If the menu number is not known, press the [ENTER] key and the display will default to
the top of the Main Menu (5), allowing the user to scroll to the menu item to be changed.
When the operator reaches the menu item to be changed, he must press the [ENTER] key followed by either a [0] to
disable or a [1] to enable the selected edit feature. An asterisk character (*) appears on the left of the display to
indicate to the menu or submenu is in the security edit mode, and not in normal mode. Press the [Cancel] key to exit
security edit mode.
A1A19000405A: Version 1.3
Table 3-48: Security Edit Functions Menu (5000)
Type
This function is used to change a menu item's security level. When
active, an "x" will appear as the first character on the second line of
the display. Please scroll past Main(5) into another menu. The
Function
current security level will appear as the last character on the second
line of the display. Press [ENTER] to edit the security level for the
ID that is shown. Choose among levels 0, 5, 7, or 8. See Table 3-49.
This function is used to change a menu item's run inhibit. When
active an "x" will appear as the first character on the second line of
Function
the display. The current run inhibit state will appear as the last
character on the second line of the display.See Table 3-49
Name
"Change security level" prohibits access to menu or menu items until
"enter security level" is set to that level or higher.
Sets the level of security on that particular menu item.
Prohibits certain parameters from being changed when drive is in the
Run State (D).
Drive running lockout will not allow the parameter to be changed while
the drive is running. "0" indicates that a parameter may be changed
while the drive is running. "1" indicates that a parameter may not be
changed while the drive is running.
s s s s
The Keypad and Display Interface
Description
Description
3
3-55