ZyXEL Communications NWA Series User Manual page 219

Figure 138 Configuration > System > SNMP > Add
The following table describes the labels in this screen.
Table 92 Configuration > System > SNMP
LABEL DESCRIPTION
User Name Select the user name of the user account for which this SNMPv3 user profile is configured.
Authentication Select the type of authentication the SNMPv3 user must use to connect to the Zyxel Device
using this SNMPv3 user profile.
Select MD5 to require the SNMPv3 user's password be encrypted by MD5 for authentication.
Select SHA to require the SNMPv3 user's password be encrypted by SHA for authentication.
Privacy Select the type of encryption the SNMPv3 user must use to connect to the Zyxel Device using
this SNMPv3 user profile.
Select NONE to not encrypt the SNMPv3 communications.
Select DES to use DES to encrypt the SNMPv3 communications.
Select AES to use AES to encrypt the SNMPv3 communications.
Privilege Select whether the SNMPv3 user can have read-only or read and write access to the Zyxel
Device using this SNMPv3 user profile.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Chapter 17 System
NWA/WAC/WAX Series User's Guide
219