ZyXEL Communications NWA Series User Manual page 256

Table 105 Dashboard (continued)
LABEL DESCRIPTION
Cloud Control Status This field displays:
•
•
•
Mouse over the circles to display detailed information.
To pass your Zyxel Device management to NCC, first make sure your Zyxel Device is
connected to the Internet. Then go to NCC and register your Zyxel Device.
1. Internet
Green - The Zyxel Device is connected to the Internet.
Orange - The Zyxel Device is not connected to the Internet.
2. Nebula
Green - The Zyxel Device is connected to NCC.
Orange - The Zyxel Device is not connected to NCC.
3. Registration
Green - The Zyxel Device is registered on NCC.
Gray - The Zyxel Device is not registered on NCC.
Nebula Slide the switch to the right to enable NCC discovery on the Zyxel Device. The Zyxel Device
Discovery
will connect to NCC and change to the NCC management mode if it:
•
•
Note: The switch is always on and cannot be disabled when the Zyxel Device is in
If the Zyxel Device cannot connect to the Internet or to NCC, move the mouse over the status circle to
check the error message.
Chapter 25 Cloud Mode
The Zyxel Device Internet connection status.
The connection status between the Zyxel Device and NCC.
The Zyxel Device registration status on NCC.
is connected to the Internet.
has been registered on NCC.
Cloud mode.
NWA/WAC/WAX Series User's Guide
256