This model has these energy saver modes:
The machine exits energy saver modes at these
times:
Slide 75
Timers
The engine controller activates the energy saver when in low power mode.
(Timers are user-settable.)
The energy saver timer and the auto off timer start at the same time when the
machine ends all jobs or when the user ends all manual operations. The auto off
timer does not wait for the energy saver timer.
If the user sets a smaller value in the energy saver timer, the auto off timer will
finish before the energy saver timer. Low power mode will not be activated. At
this time, the engine controller starts the night/off mode after the auto-off timer
finishes.
Energy Saver Modes
Low power mode
Night/off mode
When the power switch is switched on.
When originals are set on the document feeder.
When the platen cover is opened.
75
S-C4L Training