Printing Adjustments - Ricoh D109 Service Training

Leading edge registration: Check this for each
paper tray. Use SP 1001 and make sure the
registration is set to the correct tolerance levels.
Side to side registration: Use SP 1002 and make
sure the registration is set to the correct
tolerance levels.
Blank margin: Adjust the leading edge and left
edge margins only if you could not correctly
adjust the registration.
Slide 115

Printing Adjustments

Make sure the paper is set correctly in the paper tray before starting.
Use SP 5902 to print the test pattern to check the adjustments.
Blank margin:
Adjust the margins in this order:
Trailing edge
Right edge
Leading edge
Left edge
Printing Adjustments
115
S-C4L Training