Drum Cleaning and Toner Recycling
Cleaning blade
Slit
Mixing auger 1
Slide 49
Drum Cleaning and Toner Recycling
The cleaning blade gets leftover toner from the drum after an image transfer.
Then toner piles on the blade.
The toner collect coil moves toner from the pile and puts it onto the chute. Then
the toner moves to the development unit through a slit.
The drum turns about 3 mm in reverse at the end of each copy job. This moves
toner away from the cleaning blade.
Toner collection
49
S-C4L Training
coil