Ricoh D109 Service Training page 81

Duplex Printing Process – 2
Continued from previous slide
5. When the trailing edge of the
paper exits from the paper
guide, the paper guide drops
to the original position [F] and
turns the paper path sensor
[G] off.
6. The controller starts to
operate the duplex motor in
reverse; the exit roller [H]
turns in reverse, transporting
the paper to the duplex roller.
7. The paper goes over the
paper guide and reaches the
duplex roller [I].
8. The duplex roller transports
the paper into the duplex unit.
The paper goes through the
unit.
(Continued on next slide.)
Slide 81
No additional notes.
81
S-C4L Training