Friedrich VRP Series Service & Parts Manual page 59

Electrical Installation
Electrical Installation
Electrical Installation 12 & 24k
l
Remove the Electrical Access Panel (Detail B) to
Remove the electrical access panel to expose the incoming
expose the Incoming Power Terminal Block
Ppwer terminal block (Detail C, see below)
(Detail C, see below)
C
Ground
Ground
59
INSTALLATION
B
L1 L2
L1 L 2
(Electrical Installation
FIGURE 418
Remove and discard hole knock-out from
the side of the unit (Detail A)
Remove and discard hole knock-out from the side
of the unit (Detail A)
Insert all wires through the
punched out hole and fasten
Insert all wires (Green, Black, Red) through the
wires as follows:
punched out hole and fasten wires as follows:
Green to Ground
Black to L1
Red to L2
) 26