Component Identification
Reheat Control
•
The VRP models, when equipped with
the reheat option, increase room
dehumidification capability.
•
The reheat option has a coil installed
downstream of the main indoor
evaporator coil.
•
When activated, a portion of the
compressor discharge gas is routed
through the reheat coil.
•
This coil "reheats" the air leaving the
evaporator and allows longer run times
for additional dehumidification without
over-cooling the room.
39
OPERATION
COMPONENT IDENTIFICATION-REHEAT CONTROL
FIGURE 314 (
Evaporator Coil
Reheat Coil
)