EIA LLB
The EIA LLB (Electronics Industries Association local loopback)
option specifies whether the DSU IV ESP responds to the local
loopback input from the DTE. The factory default setting is
D
EIA RLB
The EIA RLB (remote loopback) option specifies whether the DSU
IV ESP responds to the RLB input from the DTE. The factory
default setting is D
DBU Answer Test
The dial backup connection can be tested while data is passing on
the DDS. In order for this test to be performed, DBU A
must be enabled on the remote unit. If DBU A
enabled, the remote unit will not accept a DBU test from the other
end. The factory default setting is D
The DBU A
A
61204011L1-1
.
ISABLED
ISABLED
T
NSWER
EST
A
is enabled.
NSWER
LWAYS
DSU IV ESP User Manual
Chapter 8. Configuring Test Options
.
.
ISABLED
is not available if the DBU C
T
NSWER
EST
T
is not
NSWER
EST
option
RITERIA
8-3