Chapter 5. Configuration Overview
Syntax and Possible Responses
CNL (Configuration Local)
This command is used to pass AT commands to the local DSU via
the V.25 bis command processor. This allows the DSU IV ESP to be
configured with AT commands using a synchronous interface. The
format is as follows:
CNL[LOCAL PASSWORD];AT[ONE OR MORE AT COMMANDS]
A local password may not be required depending on the present
configuration of the unit. Responses to CNL commands are
returned in the data format currently configured. Possible
responses include: VALA and INVAn.
CNR (Configuration Remote)
This command is used to pass AT commands over the network to
the remote DSU via the V.25 bis command processor. This allows a
remote DSU IV ESP to be configured from a synchronous interface.
The format of this command follows:
CNR[REMOTE PASSWORD];AT[ONE OR MORE AT COMMANDS]
The remote password may or may not be required depending on
the present configuration of the remote unit. Responses to the CNR
commands are returned in the data format currently configured.
Possible responses include: VAL and INVAn.
5-8
DSU IV ESP User Manual
61204011L1-1