HP zx2000 Getting Started Manual page 27

using the security/password menu
Getting Started Guide
You can set administrator and user passwords to provide different
levels of access to the system firmware:
The Administrator can access and change all settings in the EFI
Boot Manager program and can run the EFI shell.
The User can access basic functions in the EFI Boot Manager.
NOTE: This password limits access to the firmware interface only.
You must create passwords if you want to limit access to the EFI. No
passwords are set at the factory.
This is not the OS password. For information on setting OS
passwords, see your OS user guide.
Security/Password Menu
The
administrator and user passwords:
Security/Password Menu
1. Select
2. Select either:
Set Administrator Password
Set User Password
3. Select:
Set Administrator Password
set a new password
Enable/disable Password
is required
Help
for assistance
4. When you are finished, select
Setting Up and Using Your System
of the EFI lets you change the
.
Set User Password
or
to specify whether a password
Exit
.
to
1–21