Graphics Cards - HP zx2000 Getting Started Manual

Setting Up and Using Your System

graphics cards

Ä
1–8
The zx2000 workstation is available with a range of graphics cards.
Graphics cards may include an 15-pin connector, an 18-pin
connector, or both. Only one connecting cable is needed for each
monitor.
Some video cards are pre-installed in the system, whereas others
are packaged separately and shipped with the system. If your
workstation did not ship with a pre-installed graphics card, you
must install the card and load the drivers. Refer to the
documentation included with your graphics card for instructions.
For more detailed information about your graphics card, see the
manufacturer's web site:
www.ati.com
ATI:
www.NVIDIA.com
NVIDIA:
For a complete and current list of supported cards with supported
display resolutions and frequencies, see the hp zx2000 Technical
Reference Guide.
Frequencies of 85Hz and higher provide flicker-free viewing.
If the monitor you select is DDC-2B or DDC-2B+ compliant,
the graphics card will automatically limit itself to those
resolutions and frequencies supported by that monitor. In this
case, you do not need to use the tables to select your monitor.
CAUTION: To prevent possible damage to your monitor, make sure you select
a monitor that supports the resolutions and frequencies you wish to use.
Getting Started Guide