Using The Boot Option Maintenance Menu - HP zx2000 Getting Started Manual

Setting Up and Using Your System

using the boot option maintenance menu

Option
Boot from a File
Add a Boot Option
Delete Boot Option(s)
Change Boot Order
Manage BootNext
Setting
Set Auto Boot TimeOut
Select Active Console
Output Devices
Select Active Console
Input Devices
Select Active Standard
Error Devices
Cold Reset
Exit
1–20
This menu allows you to select console output and input devices as
well as various boot options. To:
display the help available for the command, select
return to the main Boot Options Maintenance menu, select
highlight an item using the arrow keys, then press
save your changes, select
Boot Option Maintenance Menu
The
options.
Manually runs a specific application or driver.
Adds items to the EFI boot menu.
Removes options from the EFI boot menu.
Changes the order of boot options. The order in which options are
listed in the EFI boot menu also reflects the order in which the
system attempts to boot.
Selects a boot option to be executed on the next system boot. This
does not change the permanent system boot settings.
Sets the amount of time the system will pause before attempting to
launch the first item in the Boot Options list.
Defines devices to display output from the system console.
Defines devices to provide input to the system console.
Defines the devices that will display error messages from the system
console.
Shuts down and restart the system.
Returns to the EFI startup menu.
Save Settings to NVRAM
contains the following
Function
Getting Started Guide
Help
Exit
Enter