Starting And Stopping Your System; Starting Your System - HP zx2000 Getting Started Manual

starting and stopping your system

starting your system

Getting Started Guide
The zx2000 workstations come in several different configurations.
Please pay careful attention to the directions below and choose the
options that match the OS and packaging that you purchased.
To start your system:
1. Turn on the monitor before you start your system.
2. Press the power button on the front panel. The system starts.
During system startup, the display may remain blank for up to
one minute. This is normal. The following should occur:
Power LED turns on
System LED blinks on and off
Diagnostic LEDs 1-4 create scrolling pattern
3. If you are prompted for a password, type it and press
The password prompt displays only if you have set a password in
the EFI Boot Manager program. (See "Using the
Security/Password Menu" on page 21.)
Setting Up and Using Your System
.
Enter
1–9