Using The Efi Shell - HP zx2000 Getting Started Manual

using the efi shell

Getting Started Guide
To access the EFI shell:
1. When the EFI boot option screen displays, use the arrow keys to
highlight , then press
EFI Shell
2. A list of file systems (drives and partitions), and block devices on
hard drives is displayed. For example:
Device mapping table
fs0: Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig00112233)
blk0: Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
blk1: Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
3. The EFI shell first searches for an optional script file named
startup.nsh. If this file is found, it is executed automatically.
If the script does not automatically start an OS or other
application, the shell then waits for commands to be entered at the
command prompt.
Setting Up and Using Your System
.
Enter
1–17