Download The Iso Image; User Interface - HP xw4300 Service And Technical Reference Manual

5.4.4 Download the ISO Image

To download the latest diagnostic utility:
1. Visit http://www.hp.com/go/workstationsupport.
2. Select your HP Workstation.
Click the download driver and software link.
3.
4. Select your OS.
Click the Diagnostic link.
5.
6. Locate HP Insight Diagnostics and click Download.
NOTE: The downloaded file includes instructions on creating the bootable CD.

5.4.5 User Interface

Navigation
The Insight Diagnostics home page contains the following tabs: Survey, Test, Status, and Log. These tabs separate
the major functions of Insight Diagnostics.
Survey Tab
When the Survey tab is selected, the Survey menu displays and enables you to view important system configuration
information. The Summary view limits the amount of data displayed, while the Advanced view shows all the data
in the selected category. Regardless of whether you choose Advanced or Summary, the following categories of
information are available on the Survey menu:
All—Gives a listing of all categories of information about the computer.
•
• Overview—Gives you a listing of general information about the computer.
Architecture—Provides system BIOS and PCI device information.
•
Asset Control—Shows asset tag, system serial number, and processor information.
•
• Communication—Shows information about the computer parallel (LPT) and serial (COM) port settings, plus
USB and network controller information.
• Graphics—Shows information about the graphics controller of the computer.
Input Devices—Shows information about the keyboard, mouse, and other input devices connected to the
•
computer.
Memory—Shows information about all memory in the computer. This includes memory slots on the system
•
board and any memory modules installed.
Miscellaneous—Shows information obtained from the computer configuration memory (CMOS), system
•
management BIOS data, system board data, and diagnostics component information.
Storage—Shows information about storage media connected to the computer. This list includes all fixed disks,
•
diskette drives, and optical drives.
System—Shows information about the system board, processor, chassis, and BIOS, plus internal speaker and
•
PCI bus information.
Multimedia—Shows information about the system Audio devices
•
Test Tab
The Test tab allows you to choose various parts of the system to test. You can also choose the type of test and testing
mode.
There are two test modes to choose from:
• Interactive Mode—Provides maximum control over the testing process. The diagnostic software will prompt you
for input during tests that require your interaction.You may also determine whether the test passed or failed.
• Unattended Mode—Does not display prompts and requires no interaction. If errors are found, they are displayed
when testing is complete.
The Insight Diagnostics utility provides the capability to test all the major pieces of hardware in the system. You can
select from several types of tests:
Quick Test—Provides a predetermined script where a sample of each hardware component is exercised and
•
requires no user intervention.
Complete Test—Provides a predetermined script where each hardware component is fully tested. You can
•
select Interactive or Unattended tests. This will change the devices tested during the Complete Test. There
are more tests available in the interactive mode, but these require user intervention.
96 System Diagnostics and Troubleshooting