HP Visualize c100 Install Manual page 7

Hp visualize c100: install guide
Hide thumbs Also See for Visualize c100:
Table of Contents

Advertisement

4 Next, you need to run the upgrade utility program to automatically convert the
NOTICE???:
The cclass_upgrade utility modifies the hardware configuration so that it
is incompatible with a C100 or C110 system. After running the utility, you
must continue with this upgrade or restore the configuration information
from /etc/ioconfig.pre_upgrade to /etc/ioconfig and /stand/ioconfig.
5 Power off your workstation by pressing the power button on the front panel.
6 Wait for the system to completely shutdown.
7 Unplug the power cord of the system unit, the monitor, and any peripheral devic-
8 Unplug the power cord from the back of the system unit.
hardware paths stored in the system's I/O configuration file. You should only run
this utility if you are going to complete the rest of the hardware upgrade described
in this document.
Enter the following command to run the upgrade utility program:
/usr/sam/lbin/cclass_upgrade
The upgrade utility prompts you to confirm that you want to continue, as fol-
lows:
Are you ready to perform the upgrade (y/n [n])?
Enter Y.
The upgrade utility proceeds to modify the I/O configuration information that is
stored in the files /etc/ioconfig and /stand/ioconfig to be compatible with the
upgraded system. The original I/O configuration information is saved in the
backup file /etc/ioconfig.pre_upgrade.
If the utility detects an A4077A Color Graphics Card or an A4078A Dual Color
Graphics Card in the system, it will inform you to remove them when you per-
form the hardware portion of this upgrade. Systems with built-in Enhanced
Graphics adapters do not support these optional graphics adapters.
If you have a Visualize48Z (A4444A) graphics adapter installed, the utility may
ask you to identify which slot the card set is installed in. Respond with the high-
est numbered option slot that the graphics adapter card set resides in.
When you press the power button, the workstation automatically shuts down the
operating system before it powers off the system.
es from ac wall outlets.
Preparing Your Workstation
5

Advertisement

Table of Contents
loading

Table of Contents