HP Visualize c100 Install Manual page 18

Installing Option Boards
Graphics Configuration Restrictions
The system supports only four graphics displays at a time. A "display" is
a video output port or connector. For example, the Dual Visualize Enhanced
Graphics Card (A4451A) is a dual display card. It has two external video
connectors so it accounts for two of the maximum of four displays. If you
installed two of these cards, they would account for the maximum of four
displays supported by the system.
The built-in graphics adapter accounts for one graphics display
(graphics0). If four displays are installed in the option slots, the built-in
graphics adapter is automatically disabled.
You may not install a dual display graphics adapter in option slot 1 and
option slot 3 at the same time. If you do, the graphics adapter in slot 1 will
be disabled.
You may not install a dual display graphics adapter in option slot 2 and
option slot 4 at the same time. If you do, the graphics adapter in slot 2 will
be disabled.
When a Visualize48Z (A4244A) two board graphics adapter is installed,
only one other graphics adapter is permitted in the option slots. It must
be installed in the next highest numbered slot after the second card of the
two board set.If the second card is in slot 4, use slot 1 for the only other per-
mitted graphics adapter.
16