HP Visualize c100 Install Manual page 16

Hp visualize c100: install guide

Hide thumbs Also See for Visualize c100:

Table of Contents

Removing Option Boards

2 Slide the EISA slider to the side to remove it, as shown in Figure 8.

3 Remove the screw from the EISA retainer, as shown in Figure 8

4 Grasp the option board by the edge with both hands and pull it straight out from

its slot. Repeat this step for each option board.

5 Set the option boards aside to be installed in the C160/C180 main tray.

Option Board

EISA Slider

EISA Retainer

Figure 8

Removing the EISA Slider and Retainer

Table of Contents