HP Visualize c100 Install Manual page 27

Hp visualize c100: install guide

Hide thumbs Also See for Visualize c100:

Table of Contents

5 Remove any external SCSI terminators from the rear of the old main tray and in-

6 Use a small flat blade screwdriver to gently pry the old model number label from

Model Number Label

Figure 17

stall them on the SCSI connectors on the rear of the system.

the front of the system. Remove the backing from the new C200 model number

label that came with the upgrade, and press it firmly into place.

Installing the Model Number Label

Installing the New Main Tray Assembly

Table of Contents