HP Visualize c100 Install Manual page 28

Hp visualize c100: install guide

Hide thumbs Also See for Visualize c100:

Table of Contents

Installing the New Main Tray Assembly

7 Replace the system unit in the floor stand, as shown in Figure 17.

Figure 18

8 Reconnect the power cables and any other cables that you disconnected when you

Installing the Floor Stand

opened the workstation.

Connect the 15 pin end of your monitor cable to the EVC adapter cable supplied

with the upgrade kit. Connect the 35 pin end of the EVC adapter cable to the

built-in graphics video connector on the rear of the system.

Table of Contents