15.1
Removing the front wheel
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screw
hole.
–
Remove screws
–
Press back the brake linings by slightly tilting the left brake
caliper laterally on the brake disc. Pull the left brake caliper
carefully back from the brake disc and hang to the side.
Info
Do not operate the hand brake lever if the brake caliper
has been removed.
–
Remove screws
–
Press back the brake linings by slightly tilting the right brake
caliper laterally on the brake disc. Pull the right brake caliper
carefully back from the brake disc and hang to the side.
Info
Do not operate the hand brake lever if the brake caliper
V01243-10
has been removed.
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the
V01244-10
braking effect.
–
Always lay the wheel down in such a way that the
brake discs are not damaged.
–
Hold the front wheel and remove the wheel spindle. Take the
front wheel out of the fork.
–
Remove spacers
V01245-10
1
and pull wheel speed sensor
3
.
4
.
5
by several rotations.
6
.
5
to push the wheel spindle out of the axle
5
.
7
.
WHEELS, TIRES 15
p. 61)
p. 61)
2
out of the
77