10.12
Decimation
When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
<STC-MBS163POE>
Decimation X (OFF), Y (OFF)
GenICam Parameter
DecimationHorizontal
DecimationVertical
(*1) Decimation cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Decimation.
STC-MBS163POE / STC-MCS163POE
Product Specifications and User's Guide
Decimation X (ON), Y (ON)
IInteger Type
Sets decimation on horizontal direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
IInteger Type
Sets decimation on vertical direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
<STC-MCS163POE>
Decimation X (OFF), Y (OFF)
No.18S109-02
Decimation X (ON), Y (ON)
49/71