Decimation - Omron STC-MBA503POE Product Specifications And User's Manual

10.12

Decimation

When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
＜STC-MBA503POE＞
Decimation X (1), Y (1)
＜STC-MCA503POE＞
Decimation X (1), Y (1)
GenICam Parameters
DecimationHorizontal
DecimationVertical
(*1) Decimation is update automatically when selecting x2 or x4 binning.
(*2) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Decimation.
STC-MBA503POE / STC-MCA503POE
Product Specifications and User's Guide
Decimation X (1), Y (2)
Decimation X (1), Y (2)
IInteger Type Sets decimation on horizontal direction
1: Disable Decimation (Default)
2: Decimates one of two pixels
3: Decimates two of three pixels
4: Decimates three of four pixels
5: Decimates four of five pixels
6: Decimates five of six pixels
7: Decimates six of seven pixels
IInteger Type Sets decimation on vertical direction
1: Disable Decimation (Default)
2: Decimates one of two pixels
3: Decimates two of three pixels
4: Decimates three of four pixels
5: Decimates four of five pixels
6: Decimates five of six pixels
7: Decimates six of seven pixels
Decimation X (2), Y (1)
Decimation X (2), Y (1)
No.19S182-01
Decimation X (2), Y (2)
Decimation X (2), Y (2)
50/73