If an error is detected during startup, an error screen appears indicating the
problem. To continue viewing the test results of the other system
components, press the
CPU Socket
Next
When the diagnostic tests are complete, one of the following screens is
displayed.
DIAGNOSTICS:
Done FAIL
System errors were detected.
You can exit the test session by pressing the
control button.
For example, if the processor is not
correctly inserted an error screen
similar to this one would appear.
EXIT
No errors were detected.
3 Troubleshooting Your HP PC Workstation
Using HP MaxiLife to Diagnose Problems
DIAGNOSTICS:
Done OK
EXIT
button.
63