System Info.
Boot Steps
Diags
3 Troubleshooting Your HP PC Workstation
Using HP MaxiLife to Diagnose Problems
System information is displayed on the LCD one screen at a time and
should detail the following:
•
Product name
•
BIOS version
•
Serial Number
To view these details, use the
screens.
Where available, the Boot steps option will display all POST steps the
next time your PC Workstation is powered on. For support purposes,
POST steps are and displayed on the LCD as follows:
HP Kayak XU700
Keyboard Test
This shows the results of diagnostics performed on the following devices
during the last startup:
•
CPU Socket
•
Power
•
Board PLL
•
RAM Modules.
To view the test results for each system component, press the
button.
If no component errors are detected, the following screen will appear.
CPU Socket
Next
62
•
Type & speed of processor
•
Number and capacity of memory
modules installed
button to scroll through the information
Post steps will be displayed on the LCD
the next time your PC Workstation is
powered on.
In this example, a keyboard test has failed
(only if "Boot Stopped" is displayed)
No errors were detected on the CPU
socket.
control