Compaq Deskpro AP400 Reference Manual page 94

8-4 Memory Upgrades
To install a memory module, follow these steps:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the workstation cover.
3. Remove the AGP graphics controller (if necessary).
4. See the following illustration to install a DIMM module.
2
1
2
Figure 8-2. Installing a DIMM module
NOTE: To remove a memory module, reverse the above procedure.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: I-CH08.DOC Last Saved On: 12/10/98 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED