Compaq Deskpro AP400 Reference Manual page 132

Solving Network Problems
Problem
Network controller
stopped working when an
expansion board was
added to the workstation.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: M-CH12.DOC Last Saved On: 12/14/98 1:52 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Continued
Possible Cause
Network drivers are not
loaded, or driver parameters
do not match current
configuration.
The cable is not securely
connected.
Network controller interrupt
overlaps the interrupt of an
expansion board.
The files containing the
network drivers are corrupted.
Compaq Professional Workstation AP400 Reference Guide
12-15
Possible Solution
Make sure the network
drivers are loaded and
that the driver parameters
match the configuration
of the network controller.
Ensure that the cable is
securely attached to the
network connector and
that the other end of the
cable is securely attached
to the correct device.
Run the Setup utility and
modify the network
controller memory value.
Reinstall the network
drivers using your
Compaq SmartStart for
Workstations CD.
Continued