Compaq Deskpro AP400 Reference Manual page 158

Appendix F
Smart Cover Sensor Settings
Sensor Settings
Refer to the following table for information on switch settings, enabling or
disabling the Smart Cover Sensor. The physical location of the SW1-S1 switch
is illustrated on the hood labels affixed to the underside of the workstation
cover.
SW1-S1
Setting
On
On
On
On
On
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
Smart Cover Sensor
Setup Smart Cover
Password Sensor
Enabled Disabled
Enabled Disabled
Enabled Notify user
Enabled Notify user
Enabled Setup
password
File Name: S-APPF.DOC Last Saved On: 12/7/98 9:17 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Cover Message
Removed Displayed
Yes No message
displayed. No setup
password required.
No No message
displayed. No setup
password required.
Yes Cover removed
message displayed.
No setup password
required. Press F1
to continue startup.
No No message
displayed. No setup
password required.
Yes Cover removed
message displayed.
No setup password
required. Press F1
to continue startup.
Compaq Professional Workstation AP400 Reference Guide
F-1
Continued