Compaq Deskpro AP400 Reference Manual page 154

D-6 POST Error Messages
POST Error Messages and Codes
Error Code
1791-Disk 1 Failure
(Secondary)
1792-Secondary Disk
Controller Failure
1793-Secondary
Controller or Disk
Failure
A Critical Error
Occurred Prior to this
Power-Up
A Collectable Memory
Error Occurred Prior to
this Power-Up
This Workstation has
experienced an NMI
(Hardware Error)
Fixed Disk Parameter
Table or BIOS Error
System Halted
XX000Y ZZ Parity Check
2
Invalid Electronic Serial
Number
(RESUME="F1" KEY)
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
Continued
Probable Source
of Problem
IDE hard drive failure
IDE circuitry failure
An error has been
detected with the CD-
ROM interface.
Critical failure (POST)
recorded into the
wellness log.
Single-bit ECC during
POST.
As indicated.
Configuration or
hardware failure.
Parity RAM failure.
The electronic serial
number is corrupt.
As indicated to
continue.
File Name: Q-APPD.DOC Last Saved On: 12/14/98 1:55 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Action
Contact your Compaq authorized
service provider.
Contact your Compaq authorized
service provider.
Run the Diagnostics utility.
Run Compaq Insight Manager to
get more details.
Run Compaq Insight Manager to
get more details.
Contact your Compaq authorized
service provider.
Run the Setup and Diagnostics
utilities.
Run the Setup and Diagnostics
utilities.
Run the Setup and Diagnostics
utilities.
Press the F1 key.