Compaq Deskpro AP400 Reference Manual page 117

4. Place the cable insulator over the end of the primary processor power
module.
Figure 11-4. Installing the primary processor power module cable insulator
5. Firmly press the primary processor power module and cable insulator
into the power module conector. Secure the two latches on the
connector.
NOTE: The latches of the primary processor power module connector hold
the cable insulator in place.
6. Reassemble the workstation.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: L-CH11.DOC Last Saved On: 12/14/98 2:34 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Professional Workstation AP400 Reference Guide
11-5