Wps Button (5 Ghz Band); Wifi Button (2.4 Ghz Band); On/Off Button; Reset Button - ADTRAN SMART/RG SR905ac User Manual

WPS Button (5 GHz Band)

WiFi Protected Setup™ (WPS) is a standard means for creating secure connections between the gateway and various wireless client
devices. It is designed to simplify the pairing process between devices. This button is located on the left side of the gateway.
Press this button for 1-3 seconds, the 5 GHz LED starts to flash. If no client pairs with the gateway after 2 minutes, the 5 GHz LED
turns off. When the gateway pairs successfully with a client, the 5 GHz LED glows solid for 5 minutes and then turns off.

WiFi Button (2.4 GHz Band)

The WiFi button toggles the 2.4 GHz WiFi radio on and off. This button is located on the left side of the gateway. Look at the 2.4 GHz
LED indicator to determine the current state of the WiFi radio.
To activate the radio, press and hold the
LED turns on. The WiFi radio is now on.
To deactivate the radio, press and hold the
LED turns off. The WiFi radio is now off.

On/Off Button

The On/Off button turns the gateway on and off. This button is located on the left side of the gateway.

Reset Button

Warning: Do not press the Reset
The Reset button returns the gateway to its default settings. This button is in a small circular hole in the back of the gateway with
the actual button mounted behind the surface. This style of push button prevents the gateway from being inadvertently reset
during handling.
To restore the current default settings, insert a thin wire (such as a paper clip) into the hole, press for 1 second, then release the
button. The gateway reboots and returns to the current defaults.
To return the gateway to factory default settings, press the
and returns to the default settings applied in the factory. This process may take a few minutes.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
WiFi button for 3-5 seconds then release. Expect a 1-3 second delay before the 2.4 GHz
WiFi button for 3-5 seconds then release. Expect a 1-3 second delay before the 2.4 GHz
button unless you want to clear the current settings.
Reset button until the LEDs flash red and orange. The gateway reboots
9