Table of Contents
Advertisement
5. In the
IPV4 Configuration
IPv4 WANs".
6. Click the
Apply
button in the
Voice
On this page, you can configure the voice settings for your Ethernet WAN.
1. In the left menu, click
2. Click the
Voice
button. The following page appears.
3. To enable the Voice feature, click the
4. Configure the tagging options:
a. In the
Tag mode
DQTagged. The default is Tagged.
b. If Tagged or DQTagged is selected, the
values are 1 - 4079. The default is 4. Enter the P-bit type. Options are 0 - 7. The default is 0.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
section, configure the settings using the information in "DHCP for IPv4 WANs" and "Static Address for
Pending changes...
dialog box to save your settings.
Network
>
Ethernet
WAN. The Ethernet WAN page appears, showing the
slide button
field, select the type of tagging that should be performed. Options are Untagged, Tagged, and
VLAN
to the right of Enabled.
and
P-bit
fields appear. Enter the ID of the appropriate VLAN. Valid
Internet
settings.
23
Advertisement
Table of Contents
