Wps Method - ADTRAN SMART/RG SR516ac Quick Start Manual

WPS Method

If the device you wish to connect to the Internet via your gateway supports the WPS secure Wi-Fi connection method,
follow these steps.
1. In the left navigation bar, click Wireless, click the band that you want to configure, and then click Security.
2. In the Enable WPS
3. On the left side of the gateway:
a. Activate the desired band by pressing
b. Activate
field, make sure that Enabled is selected, and then click
WPS by pressing the desired band button and holding it down for 7 seconds.
2.4 GHz or 5 GHz briefly on the rocker switch.
Apply/Save to save your change.