Device Groups - ADTRAN SMART/RG SR905ac User Manual

Device Groups

On this page, you can create device groups, assign devices to groups, pause access for devices, delete groups
Note: Before it is possible to assign a device to a group, configuring an access schedule is required first, then configure a device
group, and finally assign the schedule to the group.
Warning: Pausing access for LAN devices not only restricts access to the Internet but LAN access as well. This in turn prevents you
from logging in to the SmartRG gateway to make changes from any LAN clients included in the pause. With this in mind, users are
strongly advised against pausing all LAN devices at the same time. Instead, exclude at least one browser-equipped LAN device from
the Device Group to ensure that a means to modify access schedules, device groups and timeout periods is preserved.
1. In the left menu, click Devices > Device Groups. The following page appears.
Note: You cannot delete or rename the unassigned (default) group but you can assign a schedule to it and pause/restart it.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020 76