Devices; Intellifi Devices - ADTRAN SMART/RG SR905ac User Manual

Devices

In this section, you can configure and manage the devices connected to your gateway. You can group and manage LAN devices as
well as Intellifi mesh network devices.

Intellifi Devices

On this page, you can view the Intellifi mesh devices connected to the network.
Note: To extend the network, you can connect a satellite to a satellite.
1. In the left menu, click
If a device is connected via wireless, the WiFi band appears as the name instead of LAN or WAN. The device colors identify
the connection status. The
the device identifier
There are two views: the simple view (the default) and the detailed view. (The detailed view shows the IP addresses for
each device.) This map refreshes every 10 seconds.
2. To switch between the simple view and the detailed view:
a. Click the Settings
appears.
b. Click the slide button
c. Click Save Changes.
3. To change the refresh interval:
a. Click the Settings
appears.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Devices > Intellifi Devices. The following page appears showing a diagram of the connected devices.
Connection Status legend at the top right of the page explains the colors. Below that legend is
legend, showing symbols for HUB, SATELLITE, PLC, and MOCA devices.
button at the top right of the
below Show Detailed
button at the top right of the
Network Topology section. The Topology Settings diagram box
View.
Network Topology section. The Topology Settings diagram box
71