Dhcp Clients - ADTRAN SMART/RG SR905ac User Manual

2. In the Connected Hosts
the fields in the dialog box are populated with the necessary information. If the host is currently offline or you select None
in this field, you must enter the information manually.
3. Complete the fields, using the information in the table below.
4. Click Save changes to commit your changes.
The fields in this dialog box are described in the following table.
Field Description
Device Name Enter a name for the host device.
MAC Address Accept the displayed address or enter the MAC address of the host device (such as 00:23:6A:A3:7C:C3). The
MAC address of the device selected in Step 2 appears in this field.
IP Address Accept the displayed address or enter the IP address of the host device (such as 192.168.1.44). The IP address of
the device selected in Step 2 appears in this field.
IPv6 DUID Enter the DHCP Unique Identifier (DUID) for the IPv6 server.
IPv6 Host ID Enter the ID for the IPv6 host server.
To add another static DHCP configuration, repeat Steps 1-4.
To edit a static DHCP IP address, click the
and click Save Changes to commit your changes.
To remove a static DHCP IP address, click the
Click the Apply button in the

DHCP Clients

On this page, you can view the IPv4 and IPv6 DHCP clients connected to your gateway.
In the left menu, click Network
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
field, select the host server that you want to use as a static host. When you select a connected host,
Edit icon ( ) next to it. The Add/Edit dialog box appears. Change the entries as needed
Delete icon (
Pending changes... dialog box to save your settings.
> Guest Network > DHCP Clients. The following page appears.
)next to it.
39