Dhcpv6 For Ipv6 Wans - ADTRAN SMART/RG SR905ac User Manual

Field
PPP Holdoff
Allow DNS server list override

DHCPv6 for IPv6 WANs

The following fields appear when DHCPv6 is selected as the configuration method. This method is the default for IPv6 WANs.
1. Complete the fields using the information in the table below.
2. Click the Apply button in the
The fields for this option are described in the following table.
Field Description
DHCPv6 Client Mode Select the mode for the DHCPv6 client. Options are:
Request Prefix Length Select the length of the prefix sent with the request. Options are Auto, 48, 52, 56, 59 - 64, and None.
The default is Auto.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Description
Enter the number of seconds before attempting to reconnect a dropped call. The default is
zero (0).
(Optional) To allow override of the DNS server list, click the
click the slide button again.
Pending changes... dialog box to save your settings.
Autoconfig: Attempt to use the DHCP server for configuration. If no IP address is provided, then use
l
SLACC for configuration. This is the default.
Stateful: Use only the IP address provided by the DHCP server.
l
Stateless: Use only SLACC for configuration.
l
slide button. To prevent override,
20