ADTRAN SMART/RG SR905ac User Manual page 88

1. In the left menu, click
2. To enable the SNMP service, click the
3. Fill in the fields, using the information in the following table. All fields are optional.
4. Click the Apply button in the
Field Name Description
Read community Enter the SNMP community string for your network which allows read-only access.
Set community Enter the SNMP community string for your network which allows read-write access.
System name Modify the name of the gateway.
System location Modify the default location of this service.
System contact Enter the email address for the contact person.
Trap manager IP Enter the IP address of the server where the SNMP trap manager is located.
Allow SNMP to contact This option is disabled by default. To enable this option, click the
device
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Services > SNMP. The following page appears.
slide button to the right of Enabled.
Pending changes... dialog box to save your settings.
slide button.
88