Specific Application: Description Of Cr Full Leg Full Spine; (Flfs) Cassette - AGFA CR HD5 Series User Manual

AGFA CR Detectors, Plates and Cassettes (CR HD5.x, CR MD4.xR, CR HM5.x, CR MM3.xR) |
Specific Application: Description of CR Full Leg Full
Spine (FLFS) cassette
The following paragraphs give a general description of the layout and
limitations of the CR FLFS cassette.
For more specific information and instructions on the FLFS application
consult the CR Full Leg Full Spine User Manual.
2
Label
1.
Shutter-opening mechanism
2.
Yellow dot
3.
Lock to open and close the cassette
4.
CR FLFS detectors/cassettes are specifically designed for the Full Leg Full
Spine application and are easily distinguishable from CR General cassettes by
its yellow labeling and yellow dots.
The NX workstation is capable of stitching images made with detectors or
cassettes of the same type and scan resolution only. E.g. it is not possible to
stitch images made with HD5.x FLFS detectors and MD4.xR FLFS cassettes, or
images made with MD4.xR FLFS and MD4.xR SR FLFS cassettes.
Limitations
CR FLFS detectors/cassettes can be used for other than Full Leg or Full Spine
imaging, however with a limitation in the border zone. Due to the presence of
the reduced backscatter protection foil at the 35 cm borders of the cassette,
there is a risk for reduced image quality in this border area (of maximum 1
Description of the AGFA CR Detectors, Plates and Cassettes | 31
1
1
2
3
3
4 4
2322D EN 20180409 1008