AGFA CR HD5 Series User Manual page 53

AGFA CR Detectors, Plates and Cassettes (CR HD5.x, CR MD4.xR, CR HM5.x, CR MM3.xR) |
9. When the image plate is completely inside, proceed as follows:
• First insert the key into the cassette.
• Then, close the shutter.
10. Remove the key.
Handling the AGFA CR Detectors, Plates and Cassettes | 53
WARNING:
Make sure to slide in the image plate carefully. Do not let the
plate fall down vertically into the cassette! This causes
delaminations and damages of the phosphor.
Note: Make certain you put the correct image plate into the
correct cassette. The label on the image plate must
correspond to the label on the cassette.
Note: After cleaning it is necessary to erase the detector before
use.
2322D EN 20180409 1008