Lcd Messages - Canon FAXPHONE L80 Basic Manual

LCD Messages

The following messages are displayed in the LCD when the machine is performing a
task, or when it encounters an error. The error code appears in the ACTIVITY
REPORT
Message
AUTO REDIAL
BUSY/NO SIGNAL
CHANGE CARTRIDGE
9-8
Troubleshooting
Error Code Cause
— The machine is waiting to
redial the other party's
fax number because the
line was busy or the
other party did not
answer when you tried to
send the document.
#018 The fax/telephone
number you dialed is
busy.
The fax number dialed
was incorrect.
The other party's fax
machine is not working.
The other party is not
using a G3 fax machine.
The telephone line type
setting on your machine
is incorrect.
The receiving fax
machine did not answer
within 55 seconds (after
all automatic redialing
attempts).
— The toner inside the
cartridge may be
unevenly distributed.
Action
Wait for the machine to
automatically redial the fax
number (1 User's Guide).
Try sending the document
at a later time.
Check the fax number and
dial again.
Contact the other party and
have them check their fax
machine.
Contact the other party to
check that they are using a
G3 fax machine.
Set your machine for your
telephone line type
(1 p. 2-8).
Contact the other party and
have them check their fax
machine. You can try to
send the document using
manual sending via the
handset (1 User's Guide).
For an overseas call, add
pauses to the registered
number (1 User's Guide).
Redistribute the toner
inside the cartridge
(1 p. 8-7). If the message
remains, replace the
cartridge (1 p. 8-7).
Chapter 9