Preparing To Send A Fax; Documents You Can Fax; Setting The Scanning Resolution - Canon FAXPHONE L80 Basic Manual

Preparing to Send a Fax

Documents You Can Fax

For information on the types of documents you can fax and their requirements, see
Chapter 3.

Setting the Scanning Resolution

You can set the scanning resolution of documents you send. The higher the resolution
the higher the output quality at the other end, but the slower the transmission speed.
Adjust the scanning resolution according to the type of document you are sending.
If you are sending a document that requires some pages to be scanned at a different
resolution from the others, you can change the resolution setting while the document is
being scanned. However, please note that the new setting will only be effective from
the next page scanned.
Follow this procedure to set the scanning resolution:
1
Press Image Quality repeatedly until the
resolution setting you want is
displayed.
• You can select from the following:
– FAX STANDARD
Suitable for most text-only
documents.
– FAX FINE
Suitable for fine-print documents.
– FAX PHOTO
Suitable for documents that contain
images such as photos. With this
setting, areas of the document that
contain photos are automatically
scanned with 64 levels of gray, rather
than just in black & white.
– SUPER FINE
Suitable for documents that contain
fine print and images. This setting is
four times the resolution of the FAX
STANDARD setting.
2
Continue with the operation you are
performing.
• If you do not proceed with any other
operation, the LCD returns to standby
mode after about 10 seconds.
4-2
Sending Faxes
FAX PHOTO
Chapter 4