Scanned Image Blurred Or Distorted - Canon S450 User Manual

I Scanned Image Blurred or Distorted
Check 1
A
RE YOU USING A CLEAR IMAGE FOR SCANNING
Blurry images are not suited for scanning. For best scanning results,
always use a clear, sharp image. (The scanned image cannot be better
than the original image.)
Check 2
I
S THE SCANNING HOLDER UNSTAINED AND UNDAMAGED
The scanning holder is bound to get dirty. Clean the scanning holder using
a soft cloth that is dipped in a weak, neutral detergent solution, and then
wipe its wet surface off with a dry, soft cloth.
If the scanning holder is scratched or damaged, replace it.
Note You can purchase a scanning holder for A4/LTR-size images. Visit the
Canon Web site to find out about accessories and supplies
(www.ccsi.canon.com).
Check 3
A
RE YOU SCANNING THICK PAPER
The image being scanned must be thinner than 0.01 inch (0.25 mm). The
thickness including the scanning holder must be thinner than 0.02 inch
(0.45 mm).
Scanning Result Is Unsatisfactory
?
?
?
Scanner Problems 466