Table of Contents
Advertisement
3
Load the transparencies:
• Load the stack with the edges aligned against the right side of the
• Adjust the paper guide to the left side of the stack. You can print on
Note
You can load up to 30 transparencies in the sheet feeder.
4
Windows
Open the Printer Properties dialog box, then select the most appropriate
icon in the Choose Print Mode box under the Main tab. Select Transparency
in the Media Type box. Also make sure that the BJ Cartridge setting
matches the BJ cartridge installed in the printer.
Change the settings if necessary.
sheet feeder.
either side of transparencies, but using a slightly curled surface as a
print side is recommended.
Using the Windows 98/95 Printer Driver
Printing on Special Media Types
Paper Handling
83
Advertisement
Table of Contents
